Handheld Sterilizer

Product Case Show--Handheld Sterilizer

Product Overview:

a handheld sterilizer,Kill bacteria on the surface of objects or drinking water at close range

1, lamp bead

1313 4mw single

2, Sterilization power

70ma, 7.5V

3, power supply

No. 7 battery (full charge) 2; the whole machine can work continuously for not less than 100 minutes

4, The digital tube displays the sterilization time

5, Dimensions, see drawings

6, Child lock management

Press the child lock button, the blue indicator light is on; the whole circuit starts to stand by.

7, switch key

Press and hold for 2.5 seconds to turn on (the buzzer beeps once), enter the standby state, and the digital tube lights up at the same time, displaying "000"; press it again to enter the sterilization mode, and the digital light starts to count the time; press the switch key during the period to pause (standby state), the digital tube time stops, and then press to return. Press and hold for 5 seconds to shut down (while the child lock is disconnected)

Each time the key is pressed, the buzzer will sound once.

8, Automatic shutdown (automatic shutdown after 100 seconds in standby mode)

quality control:

9, The product has passed CE certification

10. All components used in the product must comply with RoHS certification and be within the validity period.

11. PCBA board process requirements comply with the content of IPC-610-E.

12. When welding the wires of the UVC LED board, the height of the solder joints should be controlled below 0.5mm; the insulating part of the wires should also not increase the height of the solder joints.

13. Each batch of PCBA boards needs to be tested for quality. Aging test, no less than 5PCS in a single batch, continuous work at 40 degrees for 8 hours; voltage and current tests at the LED are 100 percent tests.

14. In the event of a defective electronic product, we will provide a replacement or repair within 48 hours.

15. Product sterilization efficiency (internal data):