Differential plug-in transfer PCBA board

At present, there are many devices with a variety of supporting devices. For example, the cash register has an external code scanning device, a cash drawer, a monitoring host, etc. At this time, each device needs to be connected, and a device interface cable will appear outside.

When you need to move the device, you need to pull out one by one and mark it, otherwise it is easy to make mistakes when plugging in the device.

Using this plug-in adapter PCBA board is convenient for plugging and unplugging while preventing a series of problems such as wrong plugging. It solves the phenomenon of anti-wrong plugging of interfaces and messy external equipment lines.

Interface PIN: 80PIN

Power supply: 3 independent groups, each group of power supply can be independently overloaded with 60W power

LVDS: The signal circuit adopts differential impedance design and routing, which can pass 4K signals.

VGA: It uses independent VCC and GND circuits.

COM: The bus has 3 interfaces, each of which is designed independently.

USB2.0: 3 groups of independent 2.0 interface USB.

USB3.0: 1 set of independent 3.0 interface USB.

INVTER: 1 set of independent INVTER signal connection.

LED: 2 groups of LED indicator ports.

Network port: J45 interface is adopted.